top of page

BLADES

BAND SAW & CIRCULAR BLADES

TCT TUBEMASTER

Orbital flying cut-off on tube mills

Kinkelder-TubeMaster_500_new.png
1277717989_Logo kinkelder scherp 1.jpg

TubeMaster saw blades have especially been designed for orbital flying cut-off applications on tube mills.

Key features of this saw blade are fractureresistant carbide tips, protected with a high-tech TiAlN-based PVD coating.

Combined with a light cutting geometry for smooth chip evacuation, a milled like surface finish is achieved. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life.

The new generation of TubeMaster products has a new body design, new carbide grade, new tip geometry and a special coating. This results in a higher blade life and more regular blade performance.

Advantages:

  •  High line speed

  •  High blade life

  • Cuts high tensile API Pipes (up to 1.000 N/mm2, X80, HT)

  • Burr-free cut

Applications:

  • Orbital, flying cut-off applications

  • TubeMaster saw blades are available for all types of orbital cutting machines, such as MTM, OTO mills, Elmaksan, Kusakabe, Linsinger, Nakata and SMS Meer.

Parameters:
Suggested cutting speed: 350 – 400 m/min. Feed 1/2: 0,04 / 0,12 mm/tooth.

 

Note: To accommodate higher requirements of line speed or reduce vibration level, much higher cutting speeds (up to 600 m/min) can be applied. Tooth load can be raised , while respecting max fill ratio of 10% during entry. Respect max cut depth of 3mm.

bottom of page